(you don’t have to sand all the way down, just enough to remove that high gloss finish) If you are trying to keep a wood finish. I want to get as much of the finish off of the surface then let it dry. I follow this same process for both the Odie's Oil and Odie's Wood Butter. I also have about 50 or … How to Get the Best Results Woodworking With Oak How to Color-Match Wood Filler to Stained Wood Applying Polyurethane for a Durable, Beautiful Finish How to Apply a Beautiful Shellac Finish on Woodwork Applying a Gel Stain Finish Types of Wood Species for Woodworking Hand Sanding Is Essential for a Fine Wood Finish The Spruce Crafts. Fruitwood (W) Stain on Butternut Wood. I was planning to use BLO and wax. If it’s high gloss like you mention though, you will need to lightly sand it enough to remove the shine before you apply this. I normally use tung oil for my walking sticks and stuff, but am looking for a very dull finish on the butternut...nothing with a sheen. So some type of coloring agent is often used to add interest. Odor: Butternut has virtually no scent or odor when being worked. Never used this wood before and need suggestions for a finish. See the articles Wood Allergies and Toxicity and Wood Dust Safety for more information. My goal is to work as much of the finish into the wood, then let the wood soak up the rest. After the coloring you will wish to add a protective layer to your project as urethane, varnish, shellac, wax, or oil finish. Allergies/Toxicity: Besides the standard health risks associated with any type of wood dust, no further health reactions have been associated with Butternut. Hi Anna, It sounds like that wood would be a great candidate for this treatment. Similar Wood Finishes. Butternut glues, stains, and finishes well. Usually, it has a light brown to golden color, but darker then basswood or aspen and grained well. Comparing to walnut it’s easier to carve and lighter. Our Natural (No Stain) is a clear coat that allows all the natural color, grain, and character of the wood to show through. I came across some Butternut (aka white walnut) awhile back, and made six small (about 8" square) tile-topped boxes for a friend. Natural / Clear Coat (no stain) Catalyzed Conversion Varnish is the base of our Natural (clear coat). I've fallen in love with butternut (the wood) and have a few carvings I want to finish. After polishing you will get a nice piece of wood that is why it’s usually used to create furniture. Low gloss tung oil still has a sheen to it, and want something that mimics the The very whiteness of the wood makes it easy to transfer pattern lines but can be very uninteresting in the finished stage. Get DIY project ideas and easy-to-follow crafts to … After 45 minuets to an hour, buff all the remaining finish from the surface. Butternut tends to be one of the best choices for wood carving beginners. Ash White (W) Stain on Butternut Wood .